Fourth Surfboards - Doofer ESE Tech
The ultimate all rounder.
The Doofer is anything you want it to be. From mush to solid waves it is the ultimate all-rounder when you want to catch as many waves as possible and have a bunch of fun. We have tested this board at one foot Fistral all the way to 6ft Thurso and it really is a one board quiver! A great paddler, fast, easy to turn and holds a lovely line in the barrel. It’s one of our favorite boards to take away.
The Doofer came about from the boys asking me if they could get a board that will be a bit of everything for when they travel. It is essentially a hybrid board. The outline is that of a Stoker nose and a shortboard back end pulled into a round pin. The wide point is pushed right up the board to increase the rail line which gives you the feel of a shortboard when you have your back foot on the tail pad, and the nose is nice and wide which is great for paddling into waves easily. The rocker is fairly unique on the Doofer, it has a medium tail kick which is fairly curvy, into a drawn out entry rocker; providing you with the best of both worlds when it comes to hold, pocket surfing and speed. The deck is packed full of volume and the rails are similar to that of the Mad Fresh. Due to the extra volume and the higher wide point you can ride the Doofer fairly short without feeling under-gunned when the waves get a bit of size, so the balance of using it in smaller and bigger waves alike really helps it to be a versatile board. The concave is that of a Charge model from the tail to the wide point with a single running slightly deeper through the nose, helping it with paddling and lift in the water when you need to maintain your speed on the smaller waves but really gives it some hold when you are surfing off of the tailpad in bigger waves.
Superfused EPS Foam
We are using Superfused EPS Foam from US Blanks. It has a tighter fusion and cell structure due to the moulding process of the blank, this means the blank takes less resin and offers a tighter flex pattern than the standard EPS blanks available on the market. If you weren't already aware, standard EPS foam has a tighter flex than standard construction boards, so Superfused blanks are a massive step up in that respect. These blanks are around 25% lighter than standard blanks, so with the added flex properties you can see where the added performance comes from when riding the board.
Resin Research Epoxy
When the board is laminated it happens in a heat controlled environment using resin research epoxy resin. Resin research epoxy is ground breaking stuff, not only is it over 40% bio content it is also the strongest, lightest and brightest epoxy on the market. It isn't just safer to use and better for the environment, it is also the best performing resin we could get our hands on. Given the characteristics of the foam and the resin, this surfboard as a product uses less resin per foot than standard construction surfboards, meaning the weight is further reduced. It all plays a part in why this construction method is so special.
Hexel S Glass
Hexel S-glass fibre glass is used to laminate the board along with the epoxy resin. S-glass is pound for pound the strongest woven 4oz cloth available on the market. Offering up to 4x more tensile strength than other available cloths on the market. As standard we apply two layers of s-glass to each side of the board. The strength to weight ratio really is amazing All the while gaining flex recoil instead of having a stiff, non flexing, pop out feel like some EPS epoxy sandwich construction surfboards have.
Finally the board is heated in a hot box over night at 35 degrees, this ensures curing times are sped up during the first 72 hours of the boards life. Heat is a really important factor when using epoxy resins, the right temperatures must be maintained in order to exploit the epoxies characteristics.
Once the board has been in the hot box, we apply a 100% sand finish to the board which we believe is the strongest and lightest method to finish a surfboard. This finishing process is standard on all of our boards and is a testament to our factory staff that they can use this finish on our epoxy boards as well. Flatter sanding, sharper edges and resin gloss give these boards the Ferrari finish they deserve.
UK Mainland Postage
Free In-store Collections
Air Fresheners and Repair Kits -
Free 2nd Class Shipping
1st Class Shipping - £1.49
Large Letter -
2nd Class Shipping - £1.49
1st Class Shipping - £2.49
Small Items -
2nd Class Shipping - £2.79
1st Class Shipping - £3.49
Medium Items -
2nd Class Shipping - £4.79
1st Class Shipping - £6.99
Large Items -
Bodyboard Shipping - £8.49
Surfboard Shipping - £34.99 (Parcel Force 48)